- Contact Person : Mr. Lu James
- Company Name : Rongter Suzhou Mechanical & Electrical Co., Ltd.
- Tel : 86-512-66568959
- Fax : 86-512-66568912
- Address : Jiangsu,Suzhou,Room B302,No.999 Zhujiang South Rd.,Jinfeng Tech-Park,Wuzhong District
- Country/Region : China
- Zip : 215101
Portable Take Hot Knife Fabric Cutter
Specification:
| Model | HK-8-3 |
| Voltage | AC 230V/50HZ or 120V/60HZ |
| Weight | 940g |
| Power | Max.70W |
| Temperature of blade | Up to 500 degrees Celsius in seconds |
| The length of power cord | 2.5 m |
| Dimension | 23x5x4.5cm |
Operate preparation :A. Loosen the knurled nut when device is cold, insert each leg of the blade and tighten the knurled nuts, make sure that the blade and cutting head have optimal contact . of both legs of the blades are not prperly installed, the unit will not heat up. B. Power on Cutting A. Avoid direct short circuit between cutting heads. B. Put the blade on the cutting substance, actuate switch and start cutting. It is recommended to have a try firstly with small foam. C. When cutting foam it is best to keep the temperature and speed consistent. If smoke develops during the cut, you are cutting too slow or the blade is to hot which could result in an oversized, uneven cut. This can be remedied by lowering the temperature and intermittently releasing the trigger during your cut. As the cutting resistance increases, depress the trigger again. Release the switch when only 3-5cm length foam left. D.Clean the blade by brush.
About Us:
We are specialized in managing purchasing many kinds of projects in China for all trades. We hope to provide the most stable sourcing channel between us and overseas customers. We want to be who you turn to for all of your needs. Our mission is to provide you with excellent service, excellent products, it's the most important to reduce your costs.
Portable Take Hot Knife Fabric Cutter
