- Contact Person : Mr. Lu James
- Company Name : Rongter Suzhou Mechanical & Electrical Co., Ltd.
- Tel : 86-512-66568959
- Fax : 86-512-66568912
- Address : Jiangsu,Suzhou,Room B302,No.999 Zhujiang South Rd.,Jinfeng Tech-Park,Wuzhong District
- Country/Region : China
- Zip : 215101
Plastic cut knife
Hot wire foam cutter / Hot knife rope cutter / Heat cutter
Technical Data
Specified Voltage: 230V/120V Frequency: 50 Hz/60Hz
Rated Power : 60W Working Temperature: 100°C-600°C
Operation
1. Choose the blade according to your material.
2. Put the blade into the blade stand ,then tighten the six screws up
3. Turn on power, red indicators show the machine is ok
Caution: If the blade be putted wrong , it will cannot be heated .
1. Change the Temperature, make the blade touch with the material.
2. Turn on power, cut the material after seconds.
Pls note: before turn on power, the blade need touch with the material.
1. When use the tool ,Do not use the metal to touch the blade
2. The brush can move the matter on the blade
NOTE:
1. Using the tool in ventilated environmental condition
2. Do not heating the blade without touch the material.
3. When use the tool, do not touch the blade
4. After cool the blade , can take down the blade
Plastic cut knife
